Tick marks are based upon external tick mark families. The stock families are found in this folder.
On the off chance you don't know what these are here's what they look like in use.
There is a separate category of family usage called Wire Tick Marks.
This means you can use a different tick mark than those supplied. Such as "the squiggle".
Or "the ground".
If you haven't noticed these options they are found under Settings menu > Electrical Settings > Wire.
Hope this "tickles" your fancy...
2 comments:
I don't have electrical components in my families directory. Where do I get that?
Are you using Revit MEP? Which build/version are you using? This folder is installed during the stock installation of the current version of Revit MEP, not RAC or RST.
You can download the content from the Autodesk Revit Web Library however:
http:\\revit.autodesk.com/library/html
Post a Comment