The media embargo has been lifted for Revit 2016 so we're beginning to see some information surface on blogs and other sites. Fwiw, people involved with activities that carry an NDA (non-disclosure agreement) aren't permitted to discuss things they are aware of until their particular agreements are lifted. Naturally Autodesk would like to manage what is being said about their products when they release new versions, or at least be the first to start the conversation. The internet increasingly makes this impossible.
Dan Stine wrote a nice article describing the rendering changes we'll find in 2016. It will seem a little like deja vu all over again if you remember the transition from Accurender to Mental Ray. Read Dan's article, he explains it all quite well.
Luke has been sharing links to download different versions of Revit 2016 (and other Autodesk products). I'm refraining from doing so until I'm free to do so. In general Revit, on its own, gets released a bit earlier than the versions that are considered part of the Building Design Suite. I'm waiting for the latter personally.
Jeffrey (aka The Revit Kid) wrote a post earlier today about this subject too.
If you visit Autodesk's Revit pages you'll find new information is trickling in. For example there are some new Feature descriptions HERE now. Here's the Revit 2016 versus Revit 2016 LT COMPARISON. No such thing as LT for MEP users still, sorry...you're not considered light-beer drinkers.
This is also the time of year when the wailing and gnashing of teeth begins with renewed vigor. I think Autodesk manages to stub their toe each year by not adequately preparing their customers for their longer term plans and goals. Seth Godin weighed in on Hope and Expectation with his timely thoughts. Maybe it isn't possible to do that with as many customers as they have, or their frequently stated restrictions on forward-looking disclosures made by publicly traded companies? Seems to me they could do better.
As such this means each year we manage to build up hope that this year will be more awesome than the last (or the skeptic thinks less awesome). For example if we think that Revit 2016 is going to be transcendent then consider (it's my understanding) that, if you've got an active subscription and installed 2015 R2 already, you've already seen a percentage of 2016 features. The 2015 R2 is/was an early release of features slated for 2016, released early for subscription customers only.
Less surprise for you...because you're already on the inside track...
Based on what is published on their site so far, the big push with 2016 is:
A360 Collaboration for Revit (aka C4R)
Performance (more fasterer Reviting)
IFC Interoperability
Dynamo Integration
Fabrication and MEP
Structural Analysis and Modeling
Site Designer (part of R2 release only, now formally released to all 2016)
Online Analysis Feature Enhancment/Improvements
View and Tools enhancments (Reveal Constraints, Perspective View editing, PDF Exporting)
I have been quite pleased with the significantly improved performance experience with the 2015 release all year. I found myself resenting any work that required 2014 (or worse...earlier releases) very quickly. If 2016 stands on 2015's shoulders the way I've been hearing it does, then I'll be really happy to use 2016 too, right away.
Also keep in mind that, if Autodesk keeps to their timeline, next year, around this time, it will cease offering what they call Perpetual Licenses. They'll honor existing contracts/subscriptions but all new purchases will either be what they are calling Desktop Subscriptions or Cloud Service Subscriptions. Check out their BUY page for details.
I'm looking forward to getting to work with 2016.
Dan Stine wrote a nice article describing the rendering changes we'll find in 2016. It will seem a little like deja vu all over again if you remember the transition from Accurender to Mental Ray. Read Dan's article, he explains it all quite well.
Luke has been sharing links to download different versions of Revit 2016 (and other Autodesk products). I'm refraining from doing so until I'm free to do so. In general Revit, on its own, gets released a bit earlier than the versions that are considered part of the Building Design Suite. I'm waiting for the latter personally.
Jeffrey (aka The Revit Kid) wrote a post earlier today about this subject too.
If you visit Autodesk's Revit pages you'll find new information is trickling in. For example there are some new Feature descriptions HERE now. Here's the Revit 2016 versus Revit 2016 LT COMPARISON. No such thing as LT for MEP users still, sorry...you're not considered light-beer drinkers.
This is also the time of year when the wailing and gnashing of teeth begins with renewed vigor. I think Autodesk manages to stub their toe each year by not adequately preparing their customers for their longer term plans and goals. Seth Godin weighed in on Hope and Expectation with his timely thoughts. Maybe it isn't possible to do that with as many customers as they have, or their frequently stated restrictions on forward-looking disclosures made by publicly traded companies? Seems to me they could do better.
As such this means each year we manage to build up hope that this year will be more awesome than the last (or the skeptic thinks less awesome). For example if we think that Revit 2016 is going to be transcendent then consider (it's my understanding) that, if you've got an active subscription and installed 2015 R2 already, you've already seen a percentage of 2016 features. The 2015 R2 is/was an early release of features slated for 2016, released early for subscription customers only.
Less surprise for you...because you're already on the inside track...
Based on what is published on their site so far, the big push with 2016 is:
A360 Collaboration for Revit (aka C4R)
Performance (more fasterer Reviting)
IFC Interoperability
Dynamo Integration
Fabrication and MEP
Structural Analysis and Modeling
Site Designer (part of R2 release only, now formally released to all 2016)
Online Analysis Feature Enhancment/Improvements
View and Tools enhancments (Reveal Constraints, Perspective View editing, PDF Exporting)
I have been quite pleased with the significantly improved performance experience with the 2015 release all year. I found myself resenting any work that required 2014 (or worse...earlier releases) very quickly. If 2016 stands on 2015's shoulders the way I've been hearing it does, then I'll be really happy to use 2016 too, right away.
Also keep in mind that, if Autodesk keeps to their timeline, next year, around this time, it will cease offering what they call Perpetual Licenses. They'll honor existing contracts/subscriptions but all new purchases will either be what they are calling Desktop Subscriptions or Cloud Service Subscriptions. Check out their BUY page for details.
I'm looking forward to getting to work with 2016.
5 comments:
Interesting that you refer to 2015 R2 as an early release of 2016 features. Technically that may be true, but my impression was that it was an attempt to give better value for money to those who had paid subscriptions for v2015. In other words, to make amends for the meagre offerings in v2015.
[i]It's all Spin[/i]...
I knew this would be one way 2105 R2 would be received, "See we were right, 2015 was too light and this is to make up for it." instead of perceiving it as value for subscription dollars.
It's probably even true to some extent...
You know as well as I do that some projects in development are shorter in duration/scope and get finished before others.
I welcome getting a new tool or refinement to existing features just as soon as I can get them.
Like the meme, "Give us all the things!"
Although I don't see any game changers,its faster and there are alot of small improvements. I guess most of the things that I appreciate dont show up on feature lists anymore.
Im always hoping for the next big aha moment (or text and excel improvements)
Love the new hyperlink in pdf feature BUT it seems to only work with "bubbles" not with reference view tag...which we use alot!
Hi Steve,
Do you know where the revit 2016 content country kits can be downloaded?
I hear their is an australian one this year.
Post a Comment