Showing posts with label 2D. Show all posts
Showing posts with label 2D. Show all posts

Thursday, February 05, 2015

Gaps in Grids

Some people do not like grids that extend entirely through a model. I usually hear about this in building elevations. They want the grids to stop just above the model. That is easy to do when we toggle from 3D to 2D. We can drag the 2D extent of the grid above the building. If we turn on the crop boundary of the view and make sure it intersects the grids we can drag them all together faster than doing it one at time.


Some want similar behavior in plan views too. We can do the same thing unless they also want the grids to appear on both sides of the model. In this case we can use the Center Segment parameter that is part of grid types. The stock Revit templates provide three grid types: 1/4" Bubble, 1/4" Bubble Custom Gap, and 1/4" Bubble Gap. They look like this.


If we want to stop the grid from traveling all the way through a model we can use the 1/4" Bubble Gap type. The gap is created with the Center Segment parameter by using None instead of Continuous or Custom. Choosing Custom enables (turns on) three new parameters: Center Segment Weight, Center Segment Color and Center Segment Pattern (a Line Pattern).


People also ask to be able to adjust this gap differently in different plan views. At first it doesn't seem possible because adjusting one does affect other views, until you toggle the 3D status to 2D. Once the grid is using the 2D mode we can alter the gap differently in that view when compared with other views. This gap does affect elevations and sections. This means you'll have to adjust the extents of the gap in those views too, especially if you don't want the gap to show up in those views at all.


It's like Spiderman's Uncle said, "...with great power comes great responsibility". The more subtle features we engage the more work it is to manage them.

By the way, this isn't possible with Levels. There is no Center Segment parameter. There are occasions where it would be helpful if we could do this for Levels too.

Friday, November 14, 2014

Enable 2D Setting for Multiple Grid Lines

There are times when we'd like to alter the 2D (view specific) position of Grids. When you select a Grid you can click the 3D icon to toggle it to 2D. That's a one-at-a-time affair though. If you have many grids you won't look forward to doing that.

When a Grid crosses a crop boundary in a view (when the crop boundary is enabled) it switches from 3D to 2D automatically. If you want to enable the 2D setting for all the vertical grids at once turn on the view's crop boundary and make sure it crosses your grids.


Now you can adjust all the Grids end point position together just like they do automatically for the 3D setting. It will work for levels too. If you don't want the crop region long term you can just disable it afterward. The Grids or Levels will retain their alteration until (if) you elect to use the Reset to 3D Extents (right click context menu option).

Sunday, December 16, 2012

Please Just Say No to 2D Only

If you make a Revit family and it is meant to represent something real, tangible, please don't make it 2D only. In 3D your family doesn't exist and that is usually a bad thing. Everything we put in a building is three dimensional, even wall paper has thickness. If you aren't prepared to model it faithfully in three dimensions, at least use a generic box form that is at least dimensionally consistent with the thing you are representing. If you are documenting clearance zones make it 3d too. You can't use Interference Check meaningfully if it is just lines on the floor.

Resist the temptation to just make it 2D.

Tuesday, November 06, 2012

Insert 2D from File

I read another post this morning that prompted me to mention "another door", another way to get where we want to go. In this case James mentions using the Display Model setting for a view to only show the annotation (2D stuff) that's been added. The intention being to then copy/paste that useful stuff to another project. It's a harvesting exercise and one the developers created a specific tool for, "Insert 2D Elements from File".


This tool allows you to browse to another project, select from the views of that project and choose those that have 2D information that you'd like to use in this project. If you've ever thought, "I know there is a great detailing in a wall section in XYZ Project, I wish I could just grab it", you can!

It's brother (or sister) Insert Views from File allows us to harvest drafting views, schedules and sheets that contain either.