Revit MEP - Silly Revit - We Don't use those Pipe or Duct Sizes

If you don't take the time to fine tune your project templates then you'll find Revit will offer you all kinds of pipe and duct sizes. These are available in the drop down lists during placement and then later if you run Duct/Pipe Sizing.

If you don't take the time to fine tune your template you'll find Revit gives you a duct size of 11" after completing its Duct Sizing, regardless of the fact you only choose from even sizes. It's easy to blame silly Revit...but it's our fault. The Duct and Pipe Sizes are controlled via Mechanical Settings, the duct sizes for Rectangular are shown below.

We need to either delete sizes we never want or just un-check them in either column or both, Set it and forget it.

Oh, the same is true of conduit and cable tray.

Worksharing - Loading Content Part 2

In my previous post I recommended a point person be assigned to manage the loading of content for a team. That might sound like a beauracratic minded recommendation. Not me at all. It is more a matter of self preservation, wishing to avoid having to fix the resulting duplication before it becomes a bigger problem. As such there is a another minor measure we can take to help catch the issue when it occurs and fix it.

Always use Synchronize with Central (SwC) immediately after loading new families or types (or duplicating system family types). Don't place any instances.

If we can't get a single person to manage this loading then using SwC immediately afterward will increase the odds that a warning message will appear as soon as the transaction is completed. This does assume that we all develop this habit. If the warning appears than we need to examine the new family(ies) and or type(s) in the Project Browser and resolve the issue.

The goal is to avoid creating the duplicates and even more importantly using them in the project.