View Range Dialog

I hinted at this change when Revit Sunrise became available at the end of last summer. In 2016 R2, when you open the View Range dialog box and click the Show button this version will appear.

It's intended to provide more information about what the settings within View Range mean.

Fwiw, I still think this version would be better for View Range and Ceiling Plans.

Revit 2016 - Loss Method and ASHRAE Tables

Fittings and loss errors have been annoying in Revit MEP for quite some time. If we were striving for a warning free model then we'd be confounded at every turn by fittings and their loss for loss. In Revit 2015 R2 and 2016 we've got the option to assign fitting's Loss Method parameter to Coefficient from ASHRAE Table.

The ASHRAE Table Settings dialog displays graphical information that is associated with duct fittings table. We can choose from among the fitting descriptions in the table or accept the default one that is already selected.

If you select a fitting randomly and check this out you may find the dialog set to None. It only starts to work when components are well connected. That means, if you see warnings associated with fittings, its likely those fittings are not part of a well connected network yet.

Revit 2015 R2 - Reveal Constraints

A new view override feature called Reveal Constraints is part of the subscription only R2 release for Revit 2015. It is intended to make it easier to see constraints that have been applied to the model but may have been obscurred in some way. For example it is possible to use a padlock on a dimension string and then delete the string, ignoring the warning message and clicking OK to accept it but retain the constraint. Clicking the sneaky little dimension string with a padlock icon on the View Control Shortcut bar reduces the model to gray/halftone and displays constraints in a burgundy color, like below where I've locked a couple dimension between Levels.

Even constraints that are related to elements within a sketch are displayed but they are also gray or halftone. You can double-click to edit the element, if you have that feature enabled, or edit the element and then remove the constraint(s).

I've embedded the following video, which you'll find within Autodesk's help documentation.

Revit 2015 R2 - Perspective View Changes

It is not uncommon for a new Revit user, that is already familiar with Sketch Up for example, to be a bit surprised that we can't do routine modeling work while using a perspective view, called a camera view. I liken Revit to having been raised by parents with different beliefs than other software's parents have. In this instance Revit's parents didn't think it was necessary or important to let their kid model around in perspective views. Most users react to this as if they've just found out their friend's parents ground them for practically any infraction. How sad, your parents are tough!!

Good news on this front, 2015 R2 begins reducing this restriction!

The following are available in perspective views now:

• Editing tools: Move, Align, Pin and Unpin
• Reset Target tool: Restores the position of the camera target to the center of the field of view
• Toggle between the perspective and parallel representations of the 3D view

Reset Target is a new button when the view's crop region (perspective views) is selected. It places the camera target back at the center of the crop region. It may be useful if the changes you made switching back and forth between view modes has altered the view in a confusing way.

Toggling between view modes is possible through the View Cube and right click. CLICK TO find out more about these enhancements.

The online help documentation specifically notes these items when switching from parallel to perspective view modes.

• If you add elements to the parallel view that are not supported by a perspective view (such as annotations or displacement sets), and select to toggle to the perspective view, a dialog displays.
  You have the option of duplicating the view without the non-supported elements and opening the duplicate view in perspective.
• The Toggle to Perspective 3D option is only available from the parallel view if the Crop Region Visible property is selected for the view.
• Some modes are not supported in the perspective view. For example, if you are in Reveal Constraints mode in the parallel view, this mode is automatically closed when switching to perspective.
• Changes made to the View Scale in the parallel view are reset when switching back to perspective.

It's not quite the 60's, the era of free modelling, but it's a start.

Revit 2015 R2 and Shaft Openings

Another subtle change within the new R2 release (only available to active subscription customs) affects Shaft Openings. These now assume a Base Constraint equal to the associated level of the view you create it in. They also changed the order of the parameters so they are the same as the parameters as other elements that have a Base Constraint, Base Offset, Top Constraint and Top Offset.

The settings we see above are the result of creating the shaft in the floor plan view for Level 1, before I extend it any higher. If you create a Shaft Opening in a 3D view it will assume the Base Constraint of the view's active work plane.