I gave presentations at three of the four BIM Workshops this year. The first was in Omaha (August), the second in Anaheim (September), the third in Phoenix (October) and I wasn't part of the fourth event in Honolulu.
Indulging in a little historical review, the Omaha event is four years old now. However for its first two years it was called Central States Revit Workshop. It's founder, Carla Edwards, lived and worked in Omaha at the time. She attended the first Revit Technology Conference in North America hosted in Huntington Beach, CA in 2011. She told me that she was inspired and determined to bring that feeling home to where she worked and to provide that kind of experience to others but with a local focus, the region near Omaha. She found that there were many people eager to help her make it happen as well as sponsors willing to support it. I was happy to be able to speak at her first event too, and each of them since then.
A year later, after wrapping up the second event, she made a big life decision; moved to California and joined U.S. CAD, an Autodesk reseller based in California. She brought the event with her. Now in it's third year, with U.S. CAD's help they expanded the event to two cities; Omaha and Anaheim...and that brings us to this year, the event's fourth. Phoenix and Honolulu were both a single day of sessions while Omaha and Anaheim were two days of sessions.
This year the following people were designated with a national speaker role; Andy Jizba, Bill Debevc, Brandon Pike, Brian Mackey, Carla Edwards, Chris Faklaris, Chris Keck, David Magid, Eric Chappell, Kelli Lubeley, Lonnie Cumpton, Paul Aubin, Robert Bell, Me, Steven Shell and Tom Whitehead.
This meant each of us agreed to give presentations at two or more of the events. Each location also featured a selection of local/regional people who were chosen after being invited to send in their session ideas. That gave each BIM Workshop a broad reach while drawing on local talent too. It was a good mix this year as it has been for each of the previous years.
It has been my intention all along to post the files associated with both of my sessions here so people can check them out. I just waited until the last event was concluded (and I needed a little time to update the documents a bit)...and here they are.
Session: Who Moved my Cheese?
Description: There are over 30 ways to lose something you’re sure was just there. Revit offers so much control over the way things can be seen that we need a chart or list to figure out what happened to them. This session will explore those and provide an opportunity for some group therapy (troubleshooting).
I organized this as a game show to get people directly involved in the class. I selected two contestants for each visibility problem (25 problems in all). They competed for Smarties (yes the little discs of sugary goodness). I was inspired by a challenge that some of the Autodesk Revit technical support team created for a past Autodesk University. They had a booth outside of the classroom areas where people could stop by and meet them. They encouraged us to take part in this Find my Chair challenge which included some pretty diabolical, even despicable, ways that someone could hide a chair. For example, one chair was a family that had been completely stripped, just an empty file now, and reloaded. If someone did that in your office you might be inclined to encourage HR to get involved?
My session wasn't nearly so mean. It was fun to do it. I've heard from quite a few people since that they enjoyed it too. Thanks!
THIS is the HANDOUT
THIS is the DATASET
Fwiw, since I ran it as a game show with a winner and loser for each round, more than a few people suggested that I should have awarded each round's loser with a Dum Dums, I did think of it...but I didn't want to harsh anyone's mellow.
Session: Shared Coordinates: Stay Out of the Rabbit Hole
Description: It seems simple enough. Then something goes wrong. There are a few too many ways that we can manipulate this information. People often make assumptions about how it should work but don’t fully appreciate the consequences. Let’s explore the subtleties and avoid falling down the rabbit hole.
In this session I described and demonstrated using a master Revit site model to provide the basis for the real world location of a building or buildings. Then I linked separate Tiny House models (yes, inspired by Sean Burke's own Un-Boxed House project). If you've been reading this blog for long you'll probably recognize the information as being derived from a series of posts I've written here before. As much as I'd like to think every Revit user has read my blog, there are a lot of people out there who have no idea just how much information about Revit is lurking out here in the internets. Then again, maybe they just have a healthier balance in their lives?
THIS is the HANDOUT
THIS is the DATASET
I hope that these prove useful or interesting. Let me know if you have your own Who Moved my Cheese Game show sometime.
Oh, Carla recently let me know that she's decided to accept a position with an architecture firm in Denver so she can get closer to project work again AND importantly be much closer to her family. There is that notion of balance again... I wish her all the best and I'm sorry she'll have a lot more snow to deal with there than here in Southern California.
Keep an eye on the BIM Workshops site for next year's details as they become available.
Indulging in a little historical review, the Omaha event is four years old now. However for its first two years it was called Central States Revit Workshop. It's founder, Carla Edwards, lived and worked in Omaha at the time. She attended the first Revit Technology Conference in North America hosted in Huntington Beach, CA in 2011. She told me that she was inspired and determined to bring that feeling home to where she worked and to provide that kind of experience to others but with a local focus, the region near Omaha. She found that there were many people eager to help her make it happen as well as sponsors willing to support it. I was happy to be able to speak at her first event too, and each of them since then.
A year later, after wrapping up the second event, she made a big life decision; moved to California and joined U.S. CAD, an Autodesk reseller based in California. She brought the event with her. Now in it's third year, with U.S. CAD's help they expanded the event to two cities; Omaha and Anaheim...and that brings us to this year, the event's fourth. Phoenix and Honolulu were both a single day of sessions while Omaha and Anaheim were two days of sessions.
This year the following people were designated with a national speaker role; Andy Jizba, Bill Debevc, Brandon Pike, Brian Mackey, Carla Edwards, Chris Faklaris, Chris Keck, David Magid, Eric Chappell, Kelli Lubeley, Lonnie Cumpton, Paul Aubin, Robert Bell, Me, Steven Shell and Tom Whitehead.
This meant each of us agreed to give presentations at two or more of the events. Each location also featured a selection of local/regional people who were chosen after being invited to send in their session ideas. That gave each BIM Workshop a broad reach while drawing on local talent too. It was a good mix this year as it has been for each of the previous years.
It has been my intention all along to post the files associated with both of my sessions here so people can check them out. I just waited until the last event was concluded (and I needed a little time to update the documents a bit)...and here they are.
Session: Who Moved my Cheese?
Description: There are over 30 ways to lose something you’re sure was just there. Revit offers so much control over the way things can be seen that we need a chart or list to figure out what happened to them. This session will explore those and provide an opportunity for some group therapy (troubleshooting).
I organized this as a game show to get people directly involved in the class. I selected two contestants for each visibility problem (25 problems in all). They competed for Smarties (yes the little discs of sugary goodness). I was inspired by a challenge that some of the Autodesk Revit technical support team created for a past Autodesk University. They had a booth outside of the classroom areas where people could stop by and meet them. They encouraged us to take part in this Find my Chair challenge which included some pretty diabolical, even despicable, ways that someone could hide a chair. For example, one chair was a family that had been completely stripped, just an empty file now, and reloaded. If someone did that in your office you might be inclined to encourage HR to get involved?
My session wasn't nearly so mean. It was fun to do it. I've heard from quite a few people since that they enjoyed it too. Thanks!
THIS is the HANDOUT
THIS is the DATASET
Fwiw, since I ran it as a game show with a winner and loser for each round, more than a few people suggested that I should have awarded each round's loser with a Dum Dums, I did think of it...but I didn't want to harsh anyone's mellow.
Session: Shared Coordinates: Stay Out of the Rabbit Hole
Description: It seems simple enough. Then something goes wrong. There are a few too many ways that we can manipulate this information. People often make assumptions about how it should work but don’t fully appreciate the consequences. Let’s explore the subtleties and avoid falling down the rabbit hole.
In this session I described and demonstrated using a master Revit site model to provide the basis for the real world location of a building or buildings. Then I linked separate Tiny House models (yes, inspired by Sean Burke's own Un-Boxed House project). If you've been reading this blog for long you'll probably recognize the information as being derived from a series of posts I've written here before. As much as I'd like to think every Revit user has read my blog, there are a lot of people out there who have no idea just how much information about Revit is lurking out here in the internets. Then again, maybe they just have a healthier balance in their lives?
THIS is the HANDOUT
THIS is the DATASET
I hope that these prove useful or interesting. Let me know if you have your own Who Moved my Cheese Game show sometime.
Oh, Carla recently let me know that she's decided to accept a position with an architecture firm in Denver so she can get closer to project work again AND importantly be much closer to her family. There is that notion of balance again... I wish her all the best and I'm sorry she'll have a lot more snow to deal with there than here in Southern California.
Keep an eye on the BIM Workshops site for next year's details as they become available.
4 comments:
Steve, I used your game for our internal office Revit user group meeting and the staff loved it. The first 6-8 were pretty easy for them but after that I had to start giving hints.
Cool, thanks for letting me know. Hope they had fun...did you give away Smarties?
I gave them the option of smarties or Hershey's Kisses
Nice!
Post a Comment